Removing The Server Door And Bezel (Tower Model) - IBM Netfinity 5100 User Reference Manual

Removing the server door (tower model)

Removing the server door and bezel (tower model)

m o d e l ) v e r d o o r ( t o w e r R e m o v i n g t h e s e r
78
IBM® Netfinity® 5100 User's Reference
Note: The illustrations in this document might differ slightly from your hardware.
To remove the server door:
1. Unlock and open the server door.
2. Locate the flange on the top edge of the door.
3. Press down on the flange while pressing out on the door; then, lift the server door
up and off the hinge. Set the door aside in a safe place.
To remove the bezel:
1. Move the blue bezel-release lever, following the curve of the lever opening.
2. Lift the bezel tabs out of the slots and pull the bezel away from the server front.
Store the bezel in a safe place.
Bezel-release lever
Door
Flange