Removing The Server Door And Bezel (Tower Model) - IBM xSeries 150 User Reference Manual

Removing the server door and bezel (tower model)

Note:
To remove the server door:
To remove the bezel:
28
IBM® xSeries 150 : User's Reference
The illustrations in this document might differ slightly from your hardware.
Bezel-release lever
1. Unlock and open the server door.
2. Locate the flange on the top edge of the door.
3. Press down on the flange while pressing out on the door; then, lift the server door
up and off the hinge. Set the door aside in a safe place.
1. Move the blue bezel-release lever, following the curve of the lever opening.
2. Lift the bezel tabs out of the slots and pull the bezel away from the server front.
Store the bezel in a safe place.
Door
Flange