General Information; Features And Specifications - IBM eserver xSeries 232 8668 Hardware Maintenance Manual

General information

Your IBM
(SMP) server. It is ideally suited for networking environments that require superior
microprocessor performance, efficient memory management, flexibility, and large
amounts of reliable data storage.
Your xSeries 232 comes with a three-year limited warranty and IBM PC Server
90-Day Start Up Support. If you have access to the World Wide Web, you can
obtain up-to-date information about your xSeries 232 model and other IBM server
products at the following World Wide Web address:
http://www.ibm.com/eserver/xseries/
Your server serial number and model number are located on labels on the rear of
the server and on the front below the bezel.
Note: The information label containing the serial number, machine type, model

Features and specifications

The following table provides a summary of the features and specifications for your
xSeries 232 server.
Microprocessor:
v Intel
v 256 or 512 KB Level-2 cache
v Supports up to two microprocessors
Memory:
v Maximum: 4 GB
v Type: ECC, SDRAM, PC133, registered DIMMs
v Two-way interleaved
v Slots: four (Two-way interleaved)
Drives standard:
v Diskette: 1.44 MB
v CD-ROM: 48X IDE
Expansion bays:
v Hot-swap: six slim high
v Non-hot-swap: Three 5.25-inch (one used by CD-ROM drive)
v 3 pack option available
PCI expansion slots:
v One 33 MHz/32-bit
v Two 33 MHz/64-bit
v Two 66 MHz/64-bit
© Copyright IBM Corp. 2000, 2001
®
xSeries 232 is a high-performance, symmetric multiprocessing
number, and agency marks for your server is located as follows:
Tower model On the bottom of the server
On the side of the server
Rack model
® ®
Pentium III microprocessor
3