IBM eserver xSeries 232 8668 Hardware Maintenance Manual page 69

Note: The illustrations in this document might differ slightly from your hardware.
To install a DIMM:
1. Review the information listed in "Before you begin" on page 41 and review the
"Handling static-sensitive devices" on page 42. Also review the documention
that comes with your option.
2. Turn off the server and peripheral devices and disconnect all external cables
and power cords; then, remove the cover. (See the "Installing the bezel and
front door" on page 80.)
3. Touch the static-protective package containing the DIMM to any unpainted
metal surface on the server. Then, remove the DIMM from the package. You
must install memory in matched pairs: the first pair must be in slots 1 and 4,
and the second pair must be in slots 2 and 3.
Attention: To avoid breaking the retaining clips or damaging the DIMM
connectors, handle the clips gently.
4. Install the DIMM:
Installing memory-modules
DIMM 1
DIMM 2
DIMM connector
4 (J4)
DIMM connector
3 (J3)
DIMM connector
2 (J2)
DIMM connector
1 (J1)
Installing options
61