Integrated Peripherals Setup Menu - DTK PAM-0057I User Manual

Chapter 4
PCI IRQ Active By: Choose Level or Edge. The default settings is Level.
PCI IDE IRQ Map To: Choose PCI-AUTO, PCI-SLOT1, PCI-SLOT2, PCI-SLOT3, ISA. The
default setting is PCI-AUTO.
Used MEM Base Addr/Used MEM Length: These items will be shown only when "Resources
Controlled By" option is set to "Manual". They are used to reserve the memory space for the
memory installed on the ISA card in the specified memory segment (such as some network card).
The available options for "Used Mem Base Addr" are "N/A", "C800", "CC00", "D000",
"D400", "D800" and "DC00", which is used to select the base memory address of the ISA card
used. With the "Used Mem Base Addr" is selected, the size of the memory installed on ISA card
is chosen by "Used Mem Length": "8K", "16K", "32K" or "64K".
4.7

INTEGRATED PERIPHERALS SETUP MENU

The setup option is need to change the values of the integrated IDE and the I/O chipset
register for I/O functions.
IDE HDD Block Mode
IDE Primary Master PIO
IDE Primary Slave PIO
IDE Secondary Master PIO
IDE Secondary Slave PIO
IDE Primary Master UDMA
IDE Primary Slave UDMA
IDE Secondary Master UDMA
IDE Secondary Slave UDMA
On-Chip Primary PCI IDE
On-Chip Secondary PCI IDE
Onboard FDD Controller
Onboard Serial Port 1
Onboard Serial Port 2
UART 2 Mode
IR Function Duplex
RxD, TxD Active
Onboard Parallel Port
Onboard Parallel Mode
36
ROM PCI/ISA BIOS (2A59ID19)
INTEGRATED PERIPHERALS
AWARD SOFTWARE, INC.
: Disabled ECP Mode Use DMA
: Auto Parallel Port EPP Type
: Auto
: Auto
: Auto
: Disabled
: Disabled
: Disabled
: Disabled
: Disabled
: Disabled
: Enabled
: 3F8/IRQ4
: 3F8/IRQ4
: HPSIR
ESC: Quit
: Full
F1: Help
: Hi, Hi
F5: Old Values
: 3BC/IRQ7
F7: Load Setup Defaults
: ECP/EPP
Fig. 22 Integrated Peripherals Menu
: 1
: EPP1.9
↑↓ → ←: Select Item
PU/PD/+/-: Modify
(Shift)F2: Color