Power Specifications - DTK PAM-0057I User Manual

PCI IDE
•
On board supports PCI Master IDE Controller, two connectors support up to four IDE
devices such as HDD, CD ROM drive and Tape Back-up drives, etc.
•
PCI Master IDE controller supports PIO Mode 3 and 4 devices, I/O data transfer rate can be
up to 17Mb/s. DMA mode transfer rate can be up to 22Mb/s.
•
Ultra DMA mode supported. Transfer rate can be up to 33Mb/s.
System BIOS
•
Award BIOS (128KB Flash EPROM).
Slots
•
Four PCI slots
•
Four ISA slots
Board
•
4 Layer
Form Factor
•
2/3 Baby AT Size (220 x 260mm)
Environment
Working Specifications
Actual Field MTBF (hours)
Preventive Maintenance
Environmental Limits
Temperature
Relative Humidity
(without condensation)
Altitude

Power Specifications

Configuration: 133MHz Intel P54C CPU, 16MB 60ns EDO SIMM, 256KB Cache, 3.5 inch
floppy drive, 840MB Hard Disk, running at DOS prompt.
DC Voltage
+5V
+5V Stand by
+5V
+12V
-12V
104,515 hours
Not Required
Operating
0 to 50 Degree Celsius
8 to 85%
10,000ft
Tolerance Consumption (mA)
+/- 5% 860
+/- 5% 0.5
+/- 5% 0
+/- 5% 200
+/- 5% 30
Introduction
Non-operating
-10 to 65 Degree Celsius
5 to 95%
40,000ft
3