Pnp/Pci Configuration - DTK PAM-0057I User Manual

4.6

PnP/PCI CONFIGURATION

The PCI Configuration Setup option is used to configure the PCI add-on Cards on PCI
Slots. Without proper setup the PCI Add-on Cards might not function properly.
PNP OS Installed
Resources Controlled By
Reset Configuration Data
IRQ-3 assigned to
IRQ-4 assigned to
IRQ-5 assigned to
IRQ-7 assigned to
IRQ-9 assigned to
IRQ-10 assigned to
IRQ-11 assigned to
IRQ-12 assigned to
IRQ-14 assigned to
IRQ-15 assigned to
DMA-0 assigned to
DMA-1 assigned to
DMA-3 assigned to
DMA-5 assigned to
DMA-6 assigned to
DMA-7 assigned to
Fig. 21 PnP/PCI Configuration Setup Menu
A short description of the screen items follows:
PNP OS Installed: Choose "Yes" to configure the BIOS that the Operating System installed
support the Plug and Play standard.
Resources Controlled By: The Award Plug and Play BIOS has the capacity to automatically
configure all of the boot and Plug and Play compatible devices. However, this capability means
absolutely nothing unless you are using a Plug and Play operating system such as Windows 95.
Reset Configuration Data: If enable this option, the BIOS will clear and reset the ESCD after
hardware reset.
IRQ3/4/5/7/9/10/11/12/14/15, DMA0/1/3/5/6/7 assigned to: This item allows you to determine
the IRQ/DMA assigned to the ISA bus and is not available to any PCI slot. Choices are Legacy
ISA and PCI/ISA PnP.
ROM PCI/ISA BIOS (2A59ID19)
PNP/PCI CONFIGURATION
AWARD SOFTWARE, INC.
: Yes PCI IDE IRQ Map To
: Manual Primary IDE INT#
: Disabled Secondary IDE INT#
: Legacy ISA Used MEM Base Addr.
: Legacy ISA Used MEM Length
: PCI/ISA PnP
: PCI/ISA PnP
: PCI/ISA PnP
: PCI/ISA PnP
: PCI/ISA PnP
: PCI/ISA PnP
: PCI/ISA PnP
: PCI/ISA PnP
: PCI/ISA PnP
: PCI/ISA PnP
ESC: Quit
: PCI/ISA PnP
F1: Help
: PCI/ISA PnP
F5: Old Values
: PCI/ISA PnP
F7: Load Setup Defaults
: PCI/ISA PnP
: PCI-AUTO
: A
: B
: C800
: 8K
↑ ↓ → ←: Select Item
PU/PD/+/-: Modify
(Shift)F2: Color
35