5
Pull the jammed paper towards you.
6
Close the top cover.
7
Return the first folding plate.
8
Move the lock lever to the position of
"LOCK."
9
Connect the control cable to the
connector.
• Check that the first folding plate has
been installed properly.
• When you remove and return the folding
plate, make sure that you use both
hands.
2-5.
When Paper Has Jammed at the Second Folding Plate
Turn off the machine before following the procedures below.
1
Remove the control cable 2 from the
connector 2 of the second folding plate.
Chapter4 Troubleshooting Guide
Connector 2
Control cable 2
4-5