Standard Folding; Operation Procedures - Hefter TF MEGA-A Instruction Manual

Chapter2 Basic Operation
1-2.

Standard Folding

There are six types of standard folding modes: single fold, double fold, irregular accordion fold (fold out),
letter fold, accordion fold (z-fold) and gate fold. Paper is folded as shown below when the paper is placed on
the paper feed tray with its print side facing upward.
Paper ejection direction
Single fold
1-3.

Operation Procedures

Do not put neither hands nor fingers inside the machine during operation. You also need to be
careful not to get your hair, accessories and wear caught in the machine.
1
Insert the power cord in the wall socket
and turn on the power.
Press " I " to turn on the power.
Press "O" to turn off the power.
When the power is turned on, the
folding stopper of each folding plate and
the stacker rollers move to the default
positions. Wait until the machine stops
completely.
2
Loosen the fixing screws of the side
guides, and move the side guides to fit
the paper width.
2-2
Paper feed direction
Double fold Irregular
accordion fold
(Fold out)
Letter fold Accordion fold
(Z fold)
Fixing screw
Side guide
Side guide
Gate fold
Power switch
Fixing screw