Standard Folding Of Non-Standard Size Paper - Hefter TF MEGA-A Instruction Manual

3.

Standard Folding of Non-Standard Size Paper

Do not put neither hands nor fingers inside the machine during operation. You also need to be
careful not to get your hair, accessories and wear caught in the machine.
Paper other than the standard size paper are called non-standard size paper. The paper size that can be used
as non-standard size paper is as follows.
Maximum: 297 (W) x 432 (L) mm/11.69 (W) x 17.00 (L) inches
Minimum: 128 (W) x 182 (L) mm/5.04 (W) x 7.16 (L) inches
* Minimum for single fold: 90 (W) x 135 (L) mm/
3.54 (W) x 5.31 (L) inches
1
Measure the length (L).
2
Loosen the fixing screws of the side
guides, and move the side guides to fit
the paper width.
3
Raise the paper set lever and place
some paper on the paper feed tray.
Push in the paper until its lead edge touches
the guide plate.
Chapter3 Advanced Operation
Length(L):
182 to 432 mm/
7.16 to 17.00 inches
Width:128 to 297 mm/
Fixing screw
Side guide
Side guide
Paper
Paper set lever
Paper feed
direction
5.04 to 11.69 inches
Fixing screw
Guide plate
3-11