Attaching The Parts - Hefter TF MEGA-A Instruction Manual

5
Turn the bearing support lever on the
non-operator's side in the direction of
the arrow.
The bearing will be locked.
Because the bearing support lever presses
down the rubber roll, if it is not locked,
thick paper may not be folded properly.
6
Close the top cover.
2-4.

Attaching the Parts

1
Attach the second folding plate.
1) Move the lock lever of the second folding
plate to the position of "UNLOCK. "
2) Slide the second folding plate to the
machine along the shaft on each side of the
frame, then insert the U-shaped gutter on
the edge of each side into the shaft located
on the back of the frame.
3) Move the lock lever to the position of
"LOCK. "
Chapter1 Before Operation
Non-operator's side
Bearing support lever
UNLOCK
Second folding plate
Lock lever
LOCK
1-5