Double Folding Thick Paper - Hefter TF MEGA-A Instruction Manual

Chapter3 Advanced Operation
Operation Procedures (
After completing single folding of thick
paper, turn off and on the power to
return the folding stopper to its original
position. If thin paper is single-folded
before doing this procedure, the thin
paper will not be folded neatly.
1-2.

Double Folding Thick Paper

When folding fine quality thick paper 104.7 g/m
to the stacker because of the paper thickness and consequently the folded paper may not be able to pass
through the stacker rollers, resulting in paper jam. To prevent this, follow the procedures below.
Do not fold fine quality thick paper 127.9 g/m
machine or paper ejection problem may occur.
1
Loosen the fixing screws of the side
guides, and move the side guides to fit
the paper width.
2
Raise the paper set lever and place
some paper on the paper feed tray.
Push in the paper until its lead edge touches
the guide plate.
3
After pressing the side guide to each
side of the paper lightly, tighten the
screws to secure the side guides.
3-2
p2-2).
2
/28 lb into four, its folding section may open when ejected
2
/34 lb into four because paper jam inside the
Side guide
Side guide
Paper
Paper set lever
Side guide
Side guide
Fixing screw
Fixing screw
Guide plate
Fixing screw
Fixing screw