Handling Paper; Paper Used; Precautions On Stacking Paper - Hefter TF MEGA-A Instruction Manual

Chapter1 Before Operation
6.

Handling Paper

6-1.

Paper Used

•
Make sure that the printing ink on the paper has dried completely prior to use.
• If used without the ink completely dried, the folding roller or paper may become dirty.
• Paper printed with special ink may cause the swelling and deformation of the rubber rolls,
leading to folding misalignment.
•
If curled paper is used, depending on the environmental condition (temperature,
humidity), paper quantity, paper type, and paper fiber, it may not flow smoothly into
the folding plate or may not be folded properly. Flatten the paper prior to use.
•
When folding B6 size paper, if you use fine quality paper of 64 g/m
may not be able to be ejected. (EU)
•
Fan paper well prior to use.
6-2.

Precautions on Stacking Paper

•
Do not stack paper on the paper feed
tray with the left and right sides of
the paper unaligned or some sheets
protruding out.
•
Do not stack paper on the paper
feed tray with the lead and tail edges
unaligned or some sheets protruding
out.
If the paper is protruding at the lead or
tail edge, paper will not be fed stably,
resulting in problems such as paper feed
error and folding misalignment.
1-12
2
or thicker, the paper