Describing Control Panel - Hefter TF MEGA-A Instruction Manual

Chapter1 Before Operation
4.

Describing Control Panel

No.
[1] Counter/LCD display
[2]
key
[3]
key
[4] C (clear) key
[5]
(test) key
[6] key, key
[7]
(count) key
[8]
(stacker roller position correction)
key
[9]
(second folding stopper
adjustment) key
[10]
(first folding stopper adjustment)
key
[11]
(paper length setting) key
[12] Folding mode, paper feed/eject
direction lable
[13]
(folding mode) key
[14] (paper size) key
[15] Paper feed pressure label
1-10
[15] [14] [13]
[11] [10]
Name
A paper size, folding mode, the number of folded paper or error
messages are displayed.
When pressed, the machine stops.
When pressed, the machine starts folding operations.
• When the machine is stopped with paper on the paper feed tray,
• When a mis-feed has occurred, pressing this key clears the
• When set to subtract count, pressing this key cancels the subtract
Starts test folding.
Sets the details for non-standard size paper, custom folding or
folding position correction, specifies the number for subtract
count, or changes the stacker rollers position.
Switches the count mode from add count to subtract count.
Corrects the automatically set position of the stacker rollers.
Adjusts the automatically set folding position or specifies the size
of custom folding.
Adjusts the automatically set folding position or specifies the size
of custom folding.
Specifies the paper length when folding non-standard size paper
in a standard folding mode.
Shows the paper feed direction and front/back of paper and how
folded paper is discharged from the machine. Use this label when
selecting a folding mode using the folding mode key.
Selects a folding mode (six patterns).
Selects a paper size from A3, B4, A4, B5, A5, B6, LP (non-standard
size) and CF (paper for custom folding). (EU)
Selects a paper size from LD, LG, LT, ST/IN, LP (non-standard size)
and CF (paper for custom folding). (North America)
Refer to this label when setting paper feed pressure according to
the paper quality.
[12]
[9] [8] [7]
pressing this key for more than two seconds makes the counted
number return to "0."
message.
count mode and returns to the add count mode.
[1]
[6] [5] [4] [3] [2]
Function