Custom Folding Of Standard Paper - Hefter TF MEGA-A Instruction Manual

2.

Custom Folding of Standard Paper

Do not put neither hands nor fingers inside the machine during operation. You also need to be
careful not to get your hair, accessories and wear caught in the machine.
Custom folding is the method of folding paper where you specify the folding stoppers of the first and second
folding plates. The following describes the custom folding procedures taking accordion fold as an example.
1
Loosen the fixing screws of the side
guides, and move the side guides to fit
the paper width.
2
Raise the paper set lever and place
some paper on the paper feed tray.
Push in the paper until its lead edge touches
the guide plate.
3
After pressing the side guide to each
side of the paper lightly, tighten the
screws to secure the side guides.
Chapter3 Advanced Operation
Fixing screw
Side guide
Side guide
Paper
Paper set lever
Side guide
Side guide
Fixing screw
Guide plate
Fixing screw
Fixing screw
3-7