Assembling The Mower For The First Time. 1.10 - Hayter Ranger 53 Pro Owner's Handbook Manual

1.10
ASSEMBLING THE MOWER FOR THE FIRST TIME
Check that parts are delivered correctly: Remove the
mower from the packaging and check that all loose items
have been supplied correctly. Refer to the delivery checklist
opposite and the general assembly. If any items are missing,
contact your local authorised Hayter Dealer.
Assemble the handlebars: Assemble the handlebars as shown. Route the cables carefully
and clip in position to avoid damage and entanglement when using the machine.
CS223
CAUTION - PREVENT DAMAGE : When assembling the handlebar, take care to
ensure that the controls and cables do not become damaged. Always replace damaged
controls and cables before using the mower.
ASSEMBLY INSTRUCTIONS
CS224
1.10
DELIVERY CHECKLIST
Description Quantity
Handlebar Lower LH 1
Handlebar Lower RH 1
Coach Bolt 4
Washer 4
Nut 4
Handlebar Support LH 1
Handlebar Support RH 1
Large Knob 4
Upper Handlebar 1
Cap 4
Cable Guide 4
Grassbag Frame 1
Grassbag Fabric 1
Grassbag Flap 1
Owner's Handbook 1
Engine Handbook 1
1
Warranty Reg. Card
CS225B
396007AMT1004020