Logging Out; Working With The Se Manager - Fujitsu BS2000 SE700 User Manual

Architecture of the SE servers and networks
2.4.1.2

Logging out

Logging out explicitly
In the header area of the SE Manager main window click Log out to terminate the
Ê
session. See
The login window opens.
Logging out because of a session timeout
If you do not log out explicitly, the session terminates if there is no activity for 20 minutes,
i.e. if the SE Manager registers no action in this time.
I
Each user can change this setting for himself/herself in the range from 5 through 60 minutes
or exclude it:
Click in the login information in the header area. A list containing the menu item
Ê
Individual settings opens.
Click Individual settings. The Change update cycle and session timeout dialog box opens in
Ê
which you can enable/disable the session timeout and set the timeout in the range from
5 to 60 minutes.
The individual setting is stored in the SE Manager on a user-specific basis. Information
on the topic of "individual settings" is provided in the "Operation and Administration"
manual [5].

2.4.2 Working with the SE Manager

The section below describes the most important terms of the SE Manager interface and
working with the SE Manager. Detailed information on operating the SE Manager is
provided in the "Operation and Administration" manual [5].
Various window types are used in the SE Manager:
Login window: a window in which you log in using your account and password.
●
See
U41857-J-Z125-1-76
section "Main window" on page
When you want to start an action in the SE Manager after a session has timed out,
first the login window window appears, and you must log in again. Only after you
have done this will the action be executed.
section "Logging in" on page
18.
16.
Operating the SE Manager
17