Powering On The Management Unit Via The Local Console - Fujitsu BS2000 SE700 User Manual

Powering on the Management Unit via the local console Power-on, starting up BS2000, shutdown

3.2 Powering on the Management Unit via the local console

This section describes how you power on the Management Unit at the local console. You
are on the server rack of the SE server.
Open the server rack.
Ê
Pull out the draw with the local console and flap up the screen.
Ê
Press the Power On key on the MU.
Ê
I
The MU powers itself on and starts up. The startup messages are output on the local
console.
As soon as the system is ready, you receive the login request.
Enter admin (or another administrator account) as the account.
Ê
Enter admin as the password.
Ê
admin is the password of the admin account when the system is supplied. If it has
already been changed (or you are using a different password), you must enter the
current password (see also
Click Log in.
Ê
After a successful login a Gnome Desktop is loaded.
Click Computer in the task bar (bottom left).
Ê
The Applications menu drops down.
Double-click the Firefox icon to open the browser.
Ê
Enter the IP address of the MU in the browser address bar (or alternatively localhost) to
Ê
call the SE Manager of the MU.
You can now log in on the SE Manager in order to power on the Server Units and other units
(see Abschnitt „Powering on Server Units and other units" auf Seite
28
By default the local console is attached to the MU. If the connection is attached to
the Server Unit, switch over to the MU using the console switch menu (press the
HOT KEY to call it).
Abschnitt „Logging in" auf Seite 16).
29).
U41857-J-Z125-1-76