Fujitsu BS2000 SE700 User Manual page 44

Setting the system time or configuring the NTP
Select Hardware → Server (SE<model>) → <unit>(MU) → Management, System time tab:
Ê
The System time tab displays the NTP servers which are entered for automatic time
synchronization and the local time of the MU.
Adding or removing an NTP server
To add an NTP server, click Add NTP server in the Time synchronization with NTP server
Ê
group, and after making the necessary entries confirm the action.
To remove an NTP server from the NTP configuration, click the Remove icon by the
Ê
required NTP server in the Time synchronization with NTP server group and confirm the
action.
i
Changing the local time
You can only change the local time if no NTP server is active.
i
In the Local time group click the Change icon, and after making the necessary entries
Ê
confirm the action.
44
In the case of an SE server with redundant MU, the MU with the index 1 should by
default be entered as an NTP server on the MU with the index2 (for details see the
"Operation and Administration" manual [5].
Changes to the time can also have an effect on productive operation. See also
section „Effect on the time setting of the systems on the SE server" auf Seite 43".
U41857-J-Z125-1-76