Fujitsu BS2000 SE700 User Manual page 34

Starting up BS2000 (SU /390)
Please monitor the further procedure on the BS2000 console. Take note of the console
Ê
messages and answer the question messages.
As a large number of messages are output one after the other, question messages can
also quickly "disappear". The /SHOW-PENDING-MSG (or /STATUS MSG) command
enables you to have all the open question messages displayed again.
As soon as the message NSI0000 displays "System ready", startup of BS2000 has already
been largely completed. You can continue to observe the current BS2000 session on the
console and, when necessary, react to system messages (e.g. reply to a mount message).
For information on console messages which are issued by M2000/X2000, see
„Messages on the BS2000 console" auf Seite
For more extensive administration tasks in BS2000, you must log in on BS2000, see
Abschnitt „Opening and terminating BS2000 dialog" auf Seite
Information on working with the SE Manager in Native BS2000 and VM2000 modes is
provided in the "Operation and Administration" manual [5].
34
Power-on, starting up BS2000, shutdown
42.
38.
Abschnitt
U41857-J-Z125-1-76