Fujitsu BS2000 SE700 User Manual page 37

Power-on, starting up BS2000, shutdown
The menu shows, among other things, the (current and preset) load device (also called
IPL or boot load device) of BS2000. As the Server Unit was rebooted, the IPL load
device from the auto IPL configuration is set. This can differ from the IPL load device of
the last IPL. If necessary, use menu item a to select a different IPL load device.
I
Enter 1.
Ê
The settings are saved and IPL starts. The KVP is closed and the current console
messages are displayed.
Take note of the console messages and answer the question messages.
Ê
As a large number of messages are output one after the other, question messages can
also quickly "disappear". The /SHOW-PENDING-MSG (or /STATUS MSG) command
enables you to have all the open question messages displayed again.
As soon as the message NSI0000 displays "System ready", startup of BS2000 has already
been largely completed. You can continue to observe the current BS2000 session on the
console and, when necessary, react to system messages (e.g. reply to a mount message).
For information on console messages which are issued by M2000/X2000, see
„Messages on the BS2000 console" auf Seite
The [F3] and [F4] keys enable you to scroll backward and forward in the history of the
console inputs. Pressing [Ctrl] + [d] or entering ::c terminates the console.
For more extensive administration tasks in BS2000, you must log in on BS2000, see
Abschnitt „Opening and terminating BS2000 dialog" auf Seite
Information on working with the SE Manager in Native BS2000 and VM2000 modes is
provided in the "Operation and Administration" manual [5].
U41857-J-Z125-1-76
Initial startup from the IPL load device requires a DIALOG startup. For this
purpose the value d must be set for the IPL parameter Startup mode. If
necessary, select this value using menu item c.
Starting up BS2000 (SU x86)
42.
38.
Abschnitt
37