Powering On Server Units And Other Units - Fujitsu BS2000 SE700 User Manual

Power-on, starting up BS2000, shutdown

3.3 Powering on Server Units and other units

Call the SE Manager and log in, see
You manage the units of the SE server using the menu Hardware → Server (SE<model>).
When you expand this menu, all the existing units are listed.
Select Hardware and click Server (SE<model>).
Ê
The example shows an SE700.
The Units tab displays information on Server Units, Management Units (also redundant
MUs), HNCs (only for models with SU /390) and Application Units of the SE server.
Depending on the status, you use the Units tab to power the required units on or off or
reboot them.
Switching the Server Unit on
Requirement
The unit is powered off (power status OFF).
Procedure
Click the Power on icon by the required Server Unit and confirm the action with Execute
Ê
in the subsequent dialog box.
The powered-off unit is powered on. As soon as the Power status of the unit displays the
value On, you can start up BS2000 in accordance with the hardware.
i
U41857-J-Z125-1-76
After a Server Unit has been powered on, depending on the operating mode set the
Native BS2000 system or the VMs are started up if an automatic startup (auto IPL)
has been configured for this purpose, see the "Operation and Administration"
manual [5].
Powering on Server Units and other units
Abschnitt „Calling the SE Manager" auf Seite 15.
29