Loading A Paper Roll - Star TSP650II series Hardware Manual

3-6. Loading a Paper Roll

Use a paper roll that complies with the printer specifications.
(1) Push the cover open lever, and open the printer cover.
(2) Load the paper roll into the printer in the direction indicated by the figure, and pull the leading edge of the paper
straight toward you.
(3) Push on both sides of the rear cover to close it.
Note 1: Be careful not to pull the paper out at an angle, because doing so may cause the paper to jam or skew.
2: Be sure not to close the printer cover by pushing only one side.
3: Be careful not to get your fingers caught when opening or closing the printer cover.
4: After the printer cover is closed, the printer performs initial operations (from paper feeding to paper
cutting). Do not open the printer cover until the initial operations are complete.
Cover open lever
Paper roll
- 9 -