Toshiba RAV-SM564UT-E Service Manual page 184

No. Part name
1. Detachment
Control
5
P .C. board
1) Carry out work of item 1 of
2) Remove connectors which are connected
from the control P .C. board to the other
parts and then remove wiring from the
clamp.
CN510 : Louver motor (20P , White)
CN34 : Float switch (3P , Red)
CN504 : Drain pump (2P , White)
CN101 : TC sensor (2P , Black)
CN102 : TCJ sensor (2P , Red)
CN104 : Room temp. Sensor (2P , Orange)
CN333 : Fan motor power supply
CN334 : Fan motor position detection
NOTE :
Unlock the lock of the housing part and then
remove the connector.
3) Unlock the locks of the card edge spacer
(6 positions) and then remove the control
P.C. board.
2. Attachment
1) Fix the control P .C. board to the card edge
spacer (6 positions)
2) Connect the connector removed in item 1
as before and then fix the wiring with the
clamp.
3) Following to work of item 2 of
the electric parts box cover and the
suction grille as before.
Tel: 01823 665660
Heronhill - for all your Toshiba requirements
Procedure
2
(5P , White)
(3P , White)
– 184 –
www.heronhill.co.uk
.
Card edge spacer Card edge spacer Card edge spacer
2 , mount
Remarks
Clamp
Fax: 01823 665807