AV TOOL ImageMAX PLUS AVT-3800 Instruction Manual page 10

Infrared Control
Most functions of the imageMAX PLUS can be controlled from the CR-20
Infrared Remote Control unit. Below is a brief description of the commands.
♦
Turns Power On/Off
 Display: Turn Resolution Information OSD On/Off
 C-Video: Selects Composite Video Input
 S-Video: Selects S-Video Input
 YCbCr: Selects Component Video Input
 PC: Selects PC Input to Loop-through
 VGA: Sets Output Resolution as 640x480
 SVGA: Sets Output Resolution as 800x600
 XGA: Sets Output Resolution as 1024x768
 SXGA: Sets Output Resolution as 1280x1024
 480p: Sets Output Resolution as 852x480p
 576p: Sets Output Resolution as 852x576p
 720p: Sets Output Resolution as 1280x720p
 1080i: Sets Output Resolution as 1920x1080i
 Aspect: Selects Normal or Wide Aspect Ratio
 IR Set: Hold for 15 sec to unlock Front Panel
 3D: Turn 3D Enhance On/Off
 NR: Turn Digital Noise Reduction On/Off
 Mode: Same as Mode on Front Panel
 Picture: Same as Picture on Front Panel
 Reset: Not Used for this model
10