Led Indicator; Beeper - Inateck BCST-20 Instruction Manual

1.3 LED Indicator

The LED indicators on BCST-20 can help the user know about the
current operation status.
COLOR OF LED INDICATOR
Green LED on and off quickly
Purple, Flashing
(On/Off ratio 1:1)
Blue, Flashing
(On/Off ratio 1:1)
Blue, Flashing
(On/Off ratio 20ms:3s)
Red, Flashing
(On/Off ratio 1:1)

1.4 Beeper

The beeper built in BCST-20 can help the user know about the current
operation status.
BEEPING
One long beep, high tone
One short beep, high tone
One long beep, low tone
Two short beeps, high tone
MEANING
Good Read, with one short beep (high tone)
Indicates the BCST-20 Scanner in Setting
mode
Indicates the scanner is waiting for connection,
the BCST-20 stores the address, which
connects with the last time.
Indicates the BCST-20 Scanner establish
connection successfully, with two short beeps
(low-high tone).
Indicates the BCST-20 Scanner reconnect
successfully, with two short beeps (low-high
tone)
Indicates the BCST-20 Scanner has no
address of BT which connects with before.
MEANING
Power on. If the scanner has no connection
address which could connect with, flashing red.
If the scanner has connection address which
could connect with, flashing blue.
Read barcode, with green LED on and off
quickly
Configuration error, with purple flashing;
Or transmit buffer full, with green LED on and
off quickly
Power off.
17