Code 39 - Inateck BCST-20 Instruction Manual

3.6 Code 39

Decide whether or not to enable Code 39, the BCST-20 Scanner
defaults disable Code 39.
(*) Enable Code 39
Disable Code 39
Note: Read the "Disable Code 39" barcode will make the scanner not
able to read the Code 39 barcode. Thus, if the scanner cannot read
the Code 39 barcode, please try to read "Enable Code 39" to reset.
For example: Disable Codabar.
1. Read the "Enter Setup" barcode;
2. Read the "Disable Code 39" barcode;
3. Read the "Exit with Save" barcode.
Enter Setup
Exit with Save
Exit without Save
34