Checksum Transmission - Inateck BCST-20 Instruction Manual

3.9.2 Checksum Transmission

Decide whether or not to transmit Checksum.
(*) Transmit EAN-8 Checksum
Do Not Transmit EAN-8 Checksum
For example: Do Not Transmit EAN-8 Checksum.
1. Read the "Enter Setup" barcode;
2. Read the "Enable EAN-8" barcode; (If EAN-8 is disabled, it is need
to set);
3. Read the "Do Not Transmit EAN-8 Checksum" barcode;
4. Read the "Exit with Save" barcode.
Enter Setup
Exit with Save
Exit without Save
41