Scan Modes; Manual Mode - Inateck BCST-20 Instruction Manual

1.5 Scan Modes

Four kinds of scan modes are supported by the BCST-20 Barcode
Scanner:

1.5.1 Manual Mode

By default, the scan mode is set to Manual Mode. If the user keeps
press the Scan Key, the BCST-20 Scanner will emit a red light line.
This indicates the scanner could scan, the scanning will not stop until
the scanner under the following situation.
* Read a barcode successfully;
* Release the Scan Key.

Manual Mode

Enter Setup
Exit with Save
Exit without Save
19