3.5 Code 25 : Standard 25
Decide whether or not to enable Standard 25. The BCST-20 Scanner
defaults disableStandard 25.
Enable Standard 25
(*) Disable Standard 25
Note: Read the "Disable Standard 25" barcode will make the scanner
not able to read the Standard 25 barcode. Thus, if the scanner cannot
read the Standard 25 barcode, please try to read "Enable Standard
25" to reset.
For Example: Enable Standard 25.
1. Read the "Enter Setup" barcode;
2. Read the "Enable Standard 25" barcode;
3. Read the "Exit with Save" barcode.
Enter Setup
Exit with Save
Exit without Save
33