Mounting The User Maneuvered Tilt - Invacare Dahlia 30 Service Manual

Dahlia®30 / 45

2.8 Mounting the user maneuvered tilt

1.
Loosen the screw to the armrest width adjustment A. Pull the
armrest attachment B outwards.
2.
Loosen the screw C to the armrest attachment B and remove
the armrest.
3.
D
Push the transport attachment D back in place and tighten the
screw A.
4.
8
B A
A
Mount the armrest attachment tube for the user operated tilt E
on the frame and tighten the screws.
5.
Remove the armrest pad F from the standard armrest
attachment tube and place it in the new armrest tube E. Tighten
the screw G. Mount the lever for the user operated tilt H
below the armrest pad in the front of the pad. Tighten the
screw/screws.
Place the wire between the armrest pole and the side
rest.
One or two attachment screws are used depending on
the thickness of the armrest pad.
6.
Loosen the screw J in order to remove the lever for the hand
operated tilt I. Loosen the nut to the brake wire for the tilt
handle K and remove the wire L.
7.
Attach the wire of the user operated tilt M and tighten the nut N.
Alt. 1
Alt. 2
1572308-B