Changing The Hand Rim For One-Arm Drive; Mounting The Foot Operated Brake - Invacare Dahlia 30 Service Manual

2.16 Changing the hand rim for one—arm
drive
1.
A
Loosen the three screws A and remove the hand rim.
2. Turn the hand rim around in order to increase/decrease the
distance between the handrims.
3. Re-mount the turned hand rim.
Tighten the screws A again.
4.
WARNING!
Risk of injury
– Be careful if you remove the telescopic rearwheel
shaft. Point it away from your body when you release
the steel spring inside.
1572308-B

2.17 Mounting the foot operated brake

1.
B
Loosen and remove the screws A for the brake- and tilt handle
B and remove the handle. Repeat the procedure on the opposite
side.
2.
Loosen the screw C on the brake- and tilt handle and remove
the tilt handle D and the cap E. Repeat the procedure on the
opposite side.
3.
F
Separate the brake handle from the holder F and remount the
holder and the cap E. Re-tighten the screws A. Repeat the
procedure on the opposite side.
Assembly
A
A
13