Castor Attachment; Castor Attachment - Adjustments - Invacare Dahlia 30 Service Manual

Hide thumbs Also See for Dahlia 30:
Table of Contents

Advertisement

Loosen the two screws A.
1.
Tools: 5 mm Allen key
2.
Move the rear wheel attachment B backwards or forwards.
3.
Re-tighten the screws A (18–24 Nm).
WARNING!
Imbalance
– Make sure that the screws are tightened properly after
adjustment (18–24 Nm).
CAUTION!
Risk of pinching
When the rear wheel attachment is adjusted to the most
forward position and large rearwheels are used, there is
a risk of pinching the fingers as the distance between the
rear wheel and the armrest is too small.
– Move the rear wheel attachment backwards in order
to reduce the risk.
1572308-B
B
A

3.11 Castor attachment

3.11.1 Castor attachment — adjustments
1.
A
B
Loosen and remove the screws A and the nuts B. Remove the
castor attachment C on both sides.
Tool: Hexagon key 5 mm
2.
Turn the castor attachment and switch sides.
3.
A
B
Re-mount the turned castor attachment C on the opposite side.
Re-mount the screws A and the nuts B.
Settings and Adjustments
B
C
B
C
21

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dahlia 45

Table of Contents