Mounting The One-Arm Drive - Invacare Dahlia 30 Service Manual

Dahlia®30 / 45
Mount the wire hook from the brake handle in the wire holder
G. Mount the wire in the attachment washer H and place the
wire in the lower notch on the brake I.
WARNING!
Risk of injury
Poor brake effect
– Check the brake effect after mounting or adjusting the
brake.
2.15 Mounting the one—arm drive
1.
A
Loosen the two screws A and remove the existing rearwheel
attachment B.
2.
Mount the one arm drive rearwheel attachment C and tighten
the screws D (18–24 Nm).
12
3.
Mount the quick release attachments E and the nuts and washers.
4.
Mount the rearwheels F in the quick release attachments.
5.
Press the telescopic rearwheel shaft G together and place it
between the rearwheel axles H.
6.
B
Mount the telescopic rearwheel shaft G on the rearwheel axles
and release the pressure to fixate the shaft.
Pull the quick release knob I outwards to release the wheel.
WARNING!
Risk of injury
The wheels come off
– Check that the quick release knobs has locked the
wheel when you let go of the button. Test this by
trying to pull the wheel off. This should NOT be
possible.
1572308-B