Adjusting The User/Foot Operated Tilt; Armrest; Adjusting The Armrest Height; Adjusting The Armrest/Side Rest Depth - Invacare Dahlia 30 Service Manual

Dahlia®30 / 45
Loosen the handwheel A.
1.
2. Remove the headrest / neckrest.
Loosen the handle D.
3.
4. Remove the screw and the handle.
5. Rotate the headrest / neckrest attachment pole including the
attachment E.
6. Return the headrest / neckrest to the attachment.
Note that the screw to the headrest / neckrest attachment
C and the handle D must be mounted on the opposite side
due to the groves in the screw hole.
7. Return the headrest / neckrest to the attachment on the backrest.
Re-tighten the handle D.
8.

3.5 Adjusting the user/foot operated tilt

1.
Adjust the tilt resistance with the adjustment nut A on the wire.
2.
Fixate the wire in the holder with the fixation nut B. When the
desired tilt resistance is achieved, fixate the position with the
fixation nut C.
18
A

3.6 Armrest

3.6.1 Adjusting the armrest height

A
1. Adjust the height of the armrests and / or side rests by turning
the screw or the hand wheel A depending on which type of
armrest you have chosen.
2. Set the required height.
3. Re-tighten the screw / hand wheel.
CAUTION!
Risk of trapping fingers
– Be careful not to trap your fingers between the
armrest / side support pad and the armrest attachment
when adjusting the armrest height.
Using low armrests, or adjusting the armrests in low heights,
may cause conflicts with the rear wheels when tilting the
chair.
The armrests have an auto-lock to prevent involuntary
movement or detachment. Press the button B on the
armrest to release before removing or adjusting the armrest.

3.6.2 Adjusting the armrest/side rest depth

A
Loosen the screw or the handwheel A, depending on which type
1.
of armrest you have chosen
2. Set the pad and or the side rest in the required position.
3. Re-tighten the screw / handwheel.
1572308-B