Chapter 2 Operating the Library
2.7 Operating the Library
2.7.1.2
Moving a Cartridge
Procedure
1
Select the cartridge from Source Elements.
2
Select the destination location from Destination Elements.
3
Click Submit.
2.7.2
Opening the Mailslot
From the Operation > Open Mailslot screen you can see the status and unlock any enabled mailslots in the
library.
Figure 2.40 Open mailslot
To open a mailslot, click Open for the appropriate mailslot. The library will release the lock. You can then pull
the mailslot out of the library to access the mailslot.
The mailslot must be enabled before it can be opened and the mailslot will relock after 30 seconds. To
enable a mailslot or to change the relock time, see
WARNING
FUJITSU Storage ETERNUS LT260 Tape Library User's Guide -Panel Operation-
"2.5.12 Enabling or Disabling Mailslots" (page
Do Not
Hazardous moving parts exist inside this product. Do not insert tools or any por-
tion of your body into the interior of the library through the mailslot safety door.
63
Copyright 2016 FUJITSU LIMITED
End of procedure
41).
P3AM-8802-04ENZ0