Configuring Allow Unlabeled Media Setting; Figure 2.9 Allow Unlabeled Media - Fujitsu ETERNUS LT260 User Manual

Chapter 2 Operating the Library
2.5 Configuring the Library
When disabled, the library will move any tape to any tape drive. If the cartridge is incompatible with the tape
drive, the library will display a message.
It is strongly recommended that all cartridges have barcode labels with the correct media ID, and that the
Barcode Media ID Restriction is enabled.
2.5.5

Configuring Allow Unlabeled Media Setting

Although it is strongly recommended to use labeled media, the tape library is capable to detect cartridges
without barcode label within the inventory scan. This function enables the library to detect and use cartridges
unlabeled or difficult to read labels.
To enable detection of cartridges unlabeled or difficult to read labels navigate to Configuration > System >
Allow Unlabeled Media.
Procedure
1
Set the checkbox.
2
Click Submit.

Figure 2.9 Allow unlabeled media

Using this option may increase the duration of the inventory time, thus it is strongly recommended to use
correctly labeled media!
FUJITSU Storage ETERNUS LT260 Tape Library User's Guide -Panel Operation-
29
Copyright 2016 FUJITSU LIMITED
End of procedure
P3AM-8802-04ENZ0