Figure 2.31 Upgrades System Firmware; Managing System Firmware - Fujitsu ETERNUS LT260 User Manual

Chapter 2 Operating the Library
2.6 Maintaining the Library
2.6.3

Managing System Firmware

The firmware version currently installed on the library is displayed in the library status area on the Home
page. You update the library firmware from the Maintenance > Software Upgrades > System Firmware screen.

Figure 2.31 Upgrades system firmware

To update library firmware from the remote panel, click Browse and select the firmware file from the local
computer.
■ To update the library firmware from the operator panel
Procedure
1
Copy the firmware file to the USB thumb drive.
2
Insert the USB thumb drive into the USB port on the front of the library.
The library detects the USB thumb drive.
3
Select the firmware file.
4
Click Start Upgrade.
When you update the library firmware, the library will update the firmware of the expansion modules to a
compatible version.
FUJITSU Storage ETERNUS LT260 Tape Library User's Guide -Panel Operation-
56
Copyright 2016 FUJITSU LIMITED
End of procedure
P3AM-8802-04ENZ0