Configuring Tape Drives; Figure 2.17 Tape Drive Settings - Fujitsu ETERNUS LT260 User Manual

Chapter 2 Operating the Library
2.5 Configuring the Library
2.5.11

Configuring Tape Drives

From the Configuration > Drives screen you can see and modify drive configuration.

Figure 2.17 Tape drive settings

• Drive number
Drives are numbered from the bottom of the library up beginning with one. The drive currently hosting the
SCSI communication for the library is designated with (LUN).
• Serial Number
The serial number assigned to the tape drive by the library. This serial number is reported to host applica-
tions. The serial number cannot be modified.
This is not the serial number assigned to the drive by the manufacturer; the serial number assigned by the
manufacturer is shown in Manufacturer S/N.
• LTO generation
- LTO 5
Ultrium 3000, Ultrium 3280
- LTO 6
Ultrium Tape Drive, Ultrium 6250
- LTO 7
Ultrium Tape Drive
• Drive form factor
- HH
Half height
FUJITSU Storage ETERNUS LT260 Tape Library User's Guide -Panel Operation-
39
Copyright 2016 FUJITSU LIMITED P3AM-8802-04ENZ0