Enabling Or Disabling Mailslots; Figure 2.18 Enabling Or Disabling Mailslots - Fujitsu ETERNUS LT260 User Manual

Chapter 2 Operating the Library
2.5 Configuring the Library
■ To modify the configuration of one or more tape drives
Procedure
1
Modify any of the configurable values.
2
Click Submit.
To configure the number of barcode characters to report to the host application and whether to report them
from the left or right end of the label, use either the Basic Partition Wizard or Expert Partition Wizard. See
"2.5.13.1 Using the Basic Partition Wizard" (page 43)
44).
2.5.12

Enabling or Disabling Mailslots

The Configuration > Mailslot screen lists each of the mailslots and shows whether each is enabled or disabled.
To change the state, click the button for the mailslot and then click Submit. Slots not enabled as mailslots are
available as storage slots.

Figure 2.18 Enabling or disabling mailslots

The mailslot and magazine automatic re-lock duration can be selected.
Procedure
1
Selection duration: 30 seconds (default) or 5 minutes.
2
Click Submit.
FUJITSU Storage ETERNUS LT260 Tape Library User's Guide -Panel Operation-
or "2.5.13.2 Using the Expert Partition Wizard" (page
41
Copyright 2016 FUJITSU LIMITED
End of procedure
P3AM-8802-04ENZ0