Chapter 2 Operating the Library
2.5 Configuring the Library
2.5.8
Configuring the Library Network Settings
From the Configuration > Network screen you can configure the library network settings.
Figure 2.13 Network setting
Procedure
1
Navigate to the Configuration > Network screen.
2
Configure or update the Host Name and Domain Name. The remote panel URL is <
Name
>.<
3
Select the Internet protocol to use for the library.
4
Configure the settings for the selected Internet protocol.
To have the library obtain an Internet address from a DHCP server, select the DHCP or Stateless method.
5
Click Submit.
Use "Reset internal IP Range" in case that the network conflict is occurred. This function should not be used in
other case.
Refer to "User's Guide -Installation & Operation- 3.1 Powering On/Off" about how to use the function.
FUJITSU Storage ETERNUS LT260 Tape Library User's Guide -Panel Operation-
Domain Name
>.
Copyright 2016 FUJITSU LIMITED
33
Host
End of procedure
P3AM-8802-04ENZ0