Figure 2.42 Clean Drive; Cleaning A Tape Drive - Fujitsu ETERNUS LT260 User Manual

Chapter 2 Operating the Library
2.7 Operating the Library
2.7.4

Cleaning a Tape Drive

From the Operation > Clean Drive screen you can initiate a manual drive cleaning operation.
To use the auto-cleaning function, see
Cleaning Function" in "FUJITSU Storage ETERNUS LT260 Tape Library Overview".

Figure 2.42 Clean drive

Procedure
1
Select a cleaning cartridge from the Source Elements list. The library uses the barcode label
to identify cleaning cartridges.
If no cleaning cartridges are available, load one into a mailslot or magazine slot.
2
Select the tape drive to be cleaned from the Destination Elements list.
Tape drives currently containing a cartridge are not listed. To clean a tape drive not listed, move the car-
tridge out of the drive.
3
Click Submit.
FUJITSU Storage ETERNUS LT260 Tape Library User's Guide -Panel Operation-
"2.5.13 Configuring Library Partitions" (page 42)
65
Copyright 2016 FUJITSU LIMITED
and "5.5.1 Auto-
End of procedure
P3AM-8802-04ENZ0