Table of Contents
Advertisement
3.1.6.3 IRQ Resources
Move the cursor to this field and press <Enter>. This field is used
to set each system interrupt to either Reserved or PCI Device.
The settings on the screen are for reference only. Your version may not be identical
to this one.
3.1.6.4 PCI/VGA Palette Snoop
This field determines whether the MPEG ISA/VESA VGA cards
can work with PCI/VGA or not.
Enabled MPEG ISA/VESA VGA cards work with PCI/VGA.
Disabled MPEG ISA/VESA VGA cards does not work with PCI/
VGA.
3.1.6.5 Slot 1,5 to Slot 4
By default, an IRQ is automatically assigned to the PCI devices
that are installed in the PCI slots. If a PCI device has not been
assigned an IRQ, you must manually assign an IRQ for the device.
During system boot-up, you will see "NA" for the device that
does not have an IRQ assigned.
BIOS Setup
91
3
Advertisement
Table of Contents
Need help?
Do you have a question about the INFINITY 865PE and is the answer not in the manual?
Questions and answers