Table of Contents
Advertisement
Warnings and CALL OUT output
Warnings and their appropriate countermeasures
Options in the CALL OUT options column:
• Selectable: CALL OUT output can be selected/de-selected on the menu.
• Fixed: a CALL OUT signal is emitted without prior selection of this function using the menu.
Warning
HDD FULL
HDD NEAR END
ARCHIVE FULL
ARCHIVE NEAR END
COPY OVERTAKE
ERROR
ARCHIVE OVERTAKE
ERROR
COPY NEAR
OVERTAKE
ARCHIVE NEAR
OVERTAKE
COPY SIZE ERROR
ARCHIVE SIZE ERROR
RESTORE SIZE ERROR
COPY CHECK MEDIA 1
ARCHIVE CHECK MEDIA 1
RESTORE CHECK MEDIA 1
NO SIGNAL
(Q W E R T Y U I
O P { } q w e r)
[The warning will
indicate the number
of the non-functioning
camera.]
SYSTEM ERROR
REC SYSTEM ERROR
COPY SYSTEM ERROR
ARCHIVE SYSTEM ERROR
RESTORE SYSTEM ERROR
COPY R/W ERROR
ARCHIVE R/W ERROR
RESTORE R/W ERROR
•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• Warnings and CALL OUT output
84
Status
The internal hard disk drive
• When the warning is canceled, the unit
is full when either "STOP" or
will start over-writing the oldest data
remaining in the hard disk drive.
"ALARM•PROT" has been
• Archive or copy data as necessary.
selected in "REPEAT".
The storage capacity of the
hard disk drive is approach-
• Archive or copy data as necessary.
ing the value entered into
the HDD capacity setting.
The storage medium in the
• Replace the medium in the backup
backup recording device is
recording device.
full.
The limit of the archive
• Replace the medium in the backup
medium's storage capacity
recording device.
is being reached.
• If you do not wish to have the data over-
written, stop recording.
Non-backed up data was
• Change the settings for recording inter-
over-written while the HDD
val and image quality.
was in Repeat mode.
lengthen intervals and lowre image quality.)
The HDD is in Repeat mode,
• If you do not wish to have the data over-
and data which has not been
written, stop recording.
backed up will be over-written.
• Change the settings for recording inter-
(The amount of time remaining
before the unit begins over-
val and image quality.
writing is approx. 0.5% of the
lengthen intervals and lowre image quality.)
time indicated as the possible
recording duration.)
When using the copy or
restore functions, either the
amount of data to be
• Reset the range of backup or copying.
transferred exceeds the
• Replace the archive/copy medium.
limits of the storage medium,
or there is no data to be
copied.
• Check the storage medium in the RDD
or DDS device. (Insert medium if there
An error has occurred in
is none. If medium is present and you
either the RDD device or
with to use it, undo the write-protection.
the DDS device.
If medium is present and you do not
wish to use it, replace the medium.)
• Check whether the unit and camera are
properly connected, and that electricity
Visual signal was absent
is on.
for over 5 seconds during
• Check whether the visual signal is
recording.
being properly outputted.
• Check whether the unit's camera
setting is set to an empty channel.
• Confirm that the SCSI cable is properly
connected.
SCSI connection error or
• Restart operation.
system malfunction.
• Inspect the HDD/archive/copy device.
A data-writing error occurred
• Inspect the archive/copy device.
during backup or copying.
Countermeasure
(More specifically,
(More specifically,
Canceling
CALL OUT
Reference
the warning
output
Press the
WARNING
Selectable
RESET button.
Press the
WARNING
Selectable
RESET button.
Press the
WARNING
Selectable
RESET button.
Press the
WARNING
Selectable
RESET button.
Press the
WARNING
Fixed
RESET button.
Press the
Fixed
WARNING
RESET button.
Press the
WARNING
Fixed
RESET button.
Press the
WARNING
RESET button.
Fixed
• Either turn off
recording or, if the
visual signal has
been restored,
Fixed
cancel the warning
• Press the
WARNING RESET
button.
Press the
WARNING
Fixed
RESET button.
Press the
WARNING
Fixed
RESET button.
54
27,28
60-63
27,28
27,28
27,28
60-63
60-63
60-63
60-63
14,18,36
19,20
19
Advertisement
Table of Contents
