Table of Contents
Advertisement
3) Settings for TIMER PROGRAM are made as follows.
• Designate Monday to Friday as the days of operation
(SPECIAL DW). Then, in Program #1, set the action (MODE)
to "A– 1" for 08:00 to 15:00 on the designated days(SPL).
• In Program #2, set the action to "B– 1" for 15:00 to 20:00 on
the designated days.
• In Program #3, set the action to "B– 1" for 08:00 to 17:00 on
Saturday.
• In Program #4, set the action to "B– 1" for 08:00 to 17:00 on
Sunday.
• In Program #5, set the action to "EJECT" for Sunday's start-
time of 00:00 to end-time of 05:00.
Upon completing the above settings, press the unit's TIMER
REC button to initiate Timer operation.
Operation example 4
This is an operation example of a Timer setting that com-
bines NORMAL REC with Alarm Recording using MOTION
DETECTION.
System configuration
Settings are entered so that the backups are created every
Monday morning between 00:00 and 05:00. To facilitate
the exchange of the storage medium after the backup has
been completed, MODE is set to "EJECT".
Cameras in SELECT REC MODE (A) are set to operate
from 08:00 to 15:00 on Monday through Friday. Set the
unit on POWER from 15:00 to 08:00 the next morning.
Cameras in SELECT REC MODE (B) are set to operate
from 08:00 to next day 08:00 on Saturday and Sunday.
The overall schedule is as shown in the following chart.
00 : 00
Monday
Archive
replace archive medium
Monday to Friday
00 : 00
POWER
Saturday and Sunday
00 : 00
SELECT REC MODE (B)
Settings
1) Enter the same settings for the camera operation set-
ting A as those for operation example 3 in the following: the
CAMERA TITLE setting (on the <MPX DISPLAY> menu),
DEFINE GROUP SETTING (on the <NORMAL REC SET-
TING> menu), and recording conditions. Set the power set-
ting that uses MOTION DETECTION as follows.
• Set IMAGE QUALITY to "HIGH".
• Set MAX REC FIELDS to "1F".
• Set A-REC DURATION to "5M".
• Set RECORD ALARM to "ALL".
• Set PRE A-REC to "MEDIUM".
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• Operations
05 : 00
08 : 00
15 : 00
SELECT REC MODE (A)
08 : 00
08 : 00
SELECT REC MODE (B)
• On the <DEFINE ALARM GROUP> menu, set the cameras
Q,W,E,I,O,} and w.
2) Settings for MOTION DETECTION SETTING are made
as follows.
To make the M-DET SETTING, first turn the MOTION
DETECTION setting "ON" in the <INITIAL SET UP> menu.
• Using SELECTION CAMERA NO., set each of the following
camera numbers Q, W, E, I, O, } and w as follows.
• Set CH.MOTION DETECTION to "ON".
• Set SET DETECTION MASK, SENSITIVITY, MOTION
THRESHOLD TEST MODE.
3) Settings for TIMER PROGRAM are made as follows.
• Select "P1" for the setting "SELECTED PATTERN" in the
<TIMER PROGRAM> menu and select "ON" for the setting
"REC MODE (POWER)" in the <M-DET APPLICATION> menu.
24 : 00
• Designate Monday to Friday as the days of operation
(SPECIAL DW). Then, in Program #1, set the action (MODE)
POWER
to "A– 1" for 08:00 to 15:00 on the designated days(SPL).
• In Program #2, set the action to "POWER" for 15:00 to 08:00
the next morning.
• In Program #3, set the action to "POWER" for 08:00 to 08:00
24 : 00
the next morning.
• In Program #4, set the action to "POWER" for 08:00 to 08:00
the next morning.
• In Program #5, set the action to "EJECT" for Sunday's start-
time of 00:00 to end-time of 05:00.
Upon completing the above settings, press the unit's TIMER
REC button to initiate Timer operation.
<DEFINE ALARM GROUP>
CH PRI FILD
CH PRI FILD
O
@Q
2
0.11
1
0.22
W
P
1
0.22
-
E
{
1
0.22
-
R
}
-
1
0.22
T
q
-
-
Y
w
-
1
0.22
U
e
-
-
I
r
2
0.11
-
<MOTION>
1
@SELECTION CAMERA NO.
CH.MOTION DETECTION
ON
SET DETECTION MASK
SENSITIVITY
HIGH
MOTION THRESHOLD
5
TEST MODE
OFF
<TIMER PROGRAM>
P1
SELECTED PATTERN
DEFINE P1
DEFINE P2
DEFINE P3
<M-DET APPLICATION>
REC MODE (A)
OFF
REC MODE (B)
OFF
REC MODE (C)
OFF
@REC MODE (POWER)
ON
49
Advertisement
Table of Contents
