Cruise Control - Triumph Tiger XR Owner's Handbook Manual

Cruise Control

Note:
• Cruise control is not available on the
Tiger XR und Tiger XC models.
Warning
Cruise control must only be used
where you can ride safely at a steady
speed.
Cruise control should not be used
when riding in heavy traffic, on roads
with sharp/blind bends or when they
are slippery.
Using cruise control in heavy traffic,
on roads with sharp/blind bends or
when they are slippery, may result in
loss of motorcycle control and an
accident.
Warning
This Triumph motorcycle should be
operated within the legal speed limits
for the particular road travelled.
Operating a motorcycle at high speeds
can be potentially dangerous since the
time available to react to given traffic
situations is greatly reduced as speed
increases. Always reduce speed in
consideration of weather and traffic
conditions.
General Information
Warning
Only operate this Triumph motorcycle
at high speed in closed-course on-
road competition or on closed-course
racetracks. High-speed
should only then be attempted by
riders who have been instructed in the
techniques necessary for high-speed
riding and are familiar with the
motorcycle's behaviour
conditions.
High-speed operation in any other
circumstances is dangerous and will
lead to loss of motorcycle control and
an accident.
Note:
• Cruise control will not function if
there is a malfunction with the ABS
system and the ABS warning light is
illuminated.
• If the ABS system is disabled (see
page 49), the ABS warning light will
be illuminated and cruise control
WILL function.
The cruise control buttons are located
on the right hand switch housing and
can be operated with
movement by the rider.
Cruise control can be switched on or off
at any time but it can not be activated
until all the conditions described on
page 58 have been met.
operation
in all
minimum
57