Headlight Adjustment; Headlight Adjustment Lever For Loaded Conditions - Triumph Tiger XR Owner's Handbook Manual

Maintenance and Adjustment

Headlight Adjustment

Each headlight can be adjusted by
means of vertical and
adjustment screws located on the rear
of each headlight. In addition, the
headlight is equipped with an easily
accessible adjuster to allow the vertical
adjustment to be corrected when the
motorcycle is fully loaded.
3
2
cgim
1. Horizontal (LEFT - RIGHT)
adjustment screw
2. Vertical (UP - DOWN) adjustment
screw
3. Headlight adjuster lever for loaded
conditions
Switch the headlight dipped beam on.
Turn the vertical (UP
adjustment screw on the headlight
clockwise to raise the
anti-clockwise to lower the beam.
Turn the horizontal (LEFT - RIGHT)
adjustment screw clockwise to move the
beam to the right or anticlockwise to
move the beam to the left.
Switch the headlights off when the beam
settings are satisfactory.
156
Headlight Adjustment Lever for
Loaded Conditions
horizontal
1
cgin
1. Headlight adjuster lever (unloaded
position)
1
2. Headlight adjuster lever (loaded
position)
For normal (unloaded) conditions the
headlight adjuster lever should be set in
the horizontal position (1).
For loaded
headlight adjuster downwards until it
stops (2). This will lower the headlight
beams by approximately 2°.
- DOWN)
beam or
2
conditions rotate the