Rider's Seat Height Adjustment; Heated Seats (If Fitted) - Triumph Tiger XR Owner's Handbook Manual

Warning
The rider's seat is only correctly
retained and supported once the
pillion seat is correctly fitted. Never
ride the motorcycle with the pillion
seat detached or removed, as the
front seat will not be secure and may
move.
A loose or detached seat could cause
loss of motorcycle control and an
accident.

Rider's Seat Height Adjustment

2
5
3
cgih
1. Rider's seat
2. Front seat height adjuster
3. Pillion seat height adjuster
4. Low seat height position
(rear shown)
5. High seat height position
(rear shown)
The rider's seat is adjustable for height
by approximately 25 mm.
General Information
To adjust the rider's seat:
Remove the rider's seat (see page 82).
Reposition both seat height adjusters to
the higher or lower position as required.
Ensure both adjuster rails are fully
engaged in their brackets on the seat.
Refit the rider's seat (see page 82).
Always adjust
adjusters. Adjusting only one height
adjuster may prevent correct fitment
of the seat.
Riding the motorcycle
incorrectly fitted seat may cause loss
1
of motorcycle control and an accident.
After adjusting the seat, operate the
motorcycle in an area free from traffic
to gain familiarity with the new seat
position. Riding the motorcycle with
the seat in an unfamiliar position may
4
cause loss of motorcycle control and
an accident.

Heated Seats (If Fitted)

See page 63 for details on heated seat
operation.
Warning
both seat height
with an
Warning
83