Handlebar Adjustment - Triumph Tiger XR Owner's Handbook Manual

General Information

Handlebar Adjustment

The handlebars are adjustable for reach
by approximately 20 mm.
Warning
It is recommended to have handlebar
adjustments carried out by a trained
technician of an authorised Triumph
dealer. Handlebar adjustments carried
out by a technician who is not of an
authorised Triumph dealer may affect
the handling, stability or other aspects
of the motorcycle's operation which
may result in loss of motorcycle
control and an accident.
Warning
Before starting work, ensure the
motorcycle is stabilised
adequately supported. This will help
prevent injury to the operator or
damage to the motorcycle.
Note:
• This procedure assumes
handlebars are in the standard
position, as delivered
factory. If the handlebars have
already been adjusted as described
below, the fixing positions will be
reversed.
78
To adjust the handlebars, loosen and
remove the
threaded) clamp fixings, and then the
front (10 mm threaded) clamp and riser
fixings.
cgil
1. 10 mm fixings
and
2. 8 mm fixings
Lift the handlebars out of the handlebar
risers and support with the aid of an
assistant.
Rotate both risers through 180° and
the
align the fixing holes.
Reposition the handlebars to the risers.
from the
Refit the upper clamps, and secure with
the two 10 mm threaded fixings in the
rear fixing positions. Do not fully tighten
the fixings at this stage.
handlebar rear (8 mm
1
2