Seats; Seat Care; Pillion Seat - Triumph Tiger XR Owner's Handbook Manual

Seats

Seat Care

To prevent damage to the seat or seat
cover, care must be taken not to drop or
lean the seat against any surface which
may damage the seat or seat cover.
See page 160 for seat
information.
Caution
To prevent damage to the seat or seat
cover, care must be taken not to drop
the seat. Do not lean the seat against
the motorcycle or any surface which
may damage the seat or seat cover.
Instead, place the seat, with the seat
cover facing upwards, on a clean, flat
surface which is covered with a soft
cloth.
Do not place any item on the seat
which may cause damage or staining
to the seat cover.

Pillion Seat

cgie
1. Seat lock
The seat lock is located on the rear
mudguard, below the rear light unit. To
remove the seat, insert the ignition key
into the
anticlockwise while pressing down on
the rear of the seat. This will release the
seat from its lock and allow it to be slid
rearwards. If equipped with heated
cleaning
seats, disconnect the heated seat's
electrical
removal from the motorcycle.
To refit the seat, reconnect the heated
seat's electrical connector (if equipped),
engage the seat's two brackets under
the loops on the subframe and press
down at the rear to engage in the seat
lock.
2
cgif
1. Pillion seat brackets
2. Subframe loops
1
General Information
seat lock and turn
connector for complete
2
1
it
81